Hydraulic systems on tractors and implements run at high pressure. A pinhole leak can inject fluid through skin, and an injection injury needs a doctor right away even if it looks small. The eXtension Ag Safety hydraulic safety page covers the hazards.
Signs a hose needs replacing
- Wet, oily fittings or hose cover
- Cracks, blisters or bulges
- Cover worn through to the wire braid
- Kinks, flattening or crushed spots
- Hose that’s hard and stiff with age
Checking for leaks safely
- Lower implements to the ground and shut the tractor off.
- Relieve pressure by working the control levers.
- Use a piece of cardboard or wood, never your hand, to find a leak.
- Wear safety glasses.
Getting a new hose made
Bring the old hose to our shop. We build Gates hydraulic hoses in 1/4, 3/8 and 1/2 inch with the right fittings. Note where it routes so the new one doesn’t rub.
Jeff Oetting Farm, 30 Hayfield Lane, Jonesburg, MO · (636) 248-0456.

